| Citation: | GUAN R，HUANG Y Z，CHEN R，et al. Calculation of cutting angle and cutting force in face gear machining[J]. Journal of Beijing University of Aeronautics and Astronautics，2023，49（8）：1922-1929 （in Chinese） doi: 10.13700/j.bh.1001-5965.2021.0613
|
Combining a method for skiving cylindrical gear with one for machining face gear is suggested in order to increase the processing effectiveness of face gears. First, the principle of the skiving machining is analyzed, and the machining motion model and the skiving coordinate system are established. The cutting speed of the cutting point on the cutting edge of the skiving tool is derived. Secondly, the rack face and the flank face of the skiving tool are designed, the mathematical model of the cutting angle is established, and the change rule of the cutting angle of the tool during the machining process is analyzed. Finally, using VERICUT and DEFORM simulation analysis software to verify the skiving process, the post-processing errors and the influence of processing parameters on the cutting force are obtained.
| [1] |
LITVIN F, FUENTES A. Gear geometry and applied theory[M]. Cambridge: Cambridge University Press, 2004.
|
| [2] |
LITVIN F, WANG J, BOSSLER R, et al. Application of face-gear drives in helicopter transmissions[J]. Journal of Mechanical Design, 1994, 116(3): 672-676. doi: 10.1115/1.2919434
|
| [3] |
LITVIN F, FUENTES A, GONZALEZ-PEREZ I, et al. Face gear drive with helical involute pinion: Geometry, generation by a shaper and a worm, avoidance of singularities and stress analysis: NASA/CR-213443[R]. Washington, D. C. : NASA, 2005.
|
| [4] |
南耀仕, 张满栋, 吕明, 等. 面齿轮插齿仿真加工及分析[J]. 工具技术, 2018, 52(3): 77-80. doi: 10.3969/j.issn.1000-7008.2018.03.017
NAN Y S, ZHANG M D, LV M, et al. Simulation and analysis of face gear shaping process[J]. Tool Engineering, 2018, 52(3): 77-80(in Chinese). doi: 10.3969/j.issn.1000-7008.2018.03.017
|
| [5] |
李政民卿, 朱如鹏. 面齿轮插齿加工中过程包络面和理论齿廓的干涉[J]. 重庆大学学报(自然科学版), 2007, 30(5): 55-58.
LI Z M Q, ZHU R P. Process method of face-gear drive with spur involute pinion with the shaping machine[J]. Journal of Chongqing University (Natural Science Edition), 2007, 30(5): 55-58(in Chinese).
|
| [6] |
YANG X, TANG J. Research on manufacturing method of CNC plunge milling for spur face-gear[J]. Journal of Materials Processing Technology, 2014, 214(12): 3013-3019. doi: 10.1016/j.jmatprotec.2014.07.010
|
| [7] |
唐进元, 杨晓宇. 面齿轮数控插铣加工方法研究[J]. 机械传动, 2015, 39(6): 5-8. doi: 10.16578/j.issn.1004.2539.2015.06.004
TANG J Y, YANG X Y. Research of the plunge milling for face gear[J]. Journal of Mechanical Transmission, 2015, 39(6): 5-8(in Chinese). doi: 10.16578/j.issn.1004.2539.2015.06.004
|
| [8] |
YOUSHINO H, SHAO M, ISHIBASHI A. Design and manufacture of pinion cutters for finishing gears with an arbitrary profile[J]. JSME International Journal, 1992, 35(2): 313-319.
|
| [9] |
CHEN X C, LI J, LOU B C. A study on the design of error-free spur slice cutter[J]. International Journal of Advanced Manufacturing Technology, 2013, 68(1-4): 727-738. doi: 10.1007/s00170-013-4794-3
|
| [10] |
贾康, 郑帅, 郭俊康, 等. 一种刮削加工切削齿刃形计算与加工运动仿真方法[J]. 机械工程学报, 2019, 55(1): 216-224. doi: 10.3901/JME.2019.01.216
JIA K, ZHENG S, GUO J K, et al. A method of cutter profile identification and machining motion simulation for skiving[J]. Journal of Mechanical Engineering, 2019, 55(1): 216-224(in Chinese). doi: 10.3901/JME.2019.01.216
|
| [11] |
SPATH D, HÜHSAM A. Skiving forhigh-performance machining of periodic structures[J]. CIRP Annals-Manufacturing Technology, 2002, 51(1): 91-94. doi: 10.1016/S0007-8506(07)61473-5
|
| [12] |
GUO Z, MAO S M, LIANG H Y, et al. Research and improvement of the cutting performance of skiving tool[J]. Mechanism and Machine Theory, 2018, 120: 302-313. doi: 10.1016/j.mechmachtheory.2017.08.004
|
| [13] |
GUO E K, HONG R, HUANG X, et al. Research on the design of skiving tool for machining involute gears[J]. Journal of Mechanical Science and Technology, 2014, 28: 5107-5115. doi: 10.1007/s12206-014-1133-z
|
| [14] |
VARGAS B, ZAPF M, KLOSE J, et al. Numerical modelling of cutting forces in gear skiving[J]. Procedia CIRP, 2019, 82: 455-460. doi: 10.1016/j.procir.2019.04.039
|
| [15] |
WANG Y Z, SU G Y, CHU X M, et al. A finishing method for the continuous generation of spur face gears with shaving cutters[J]. International Journal of Mechanical Sciences, 2021, 190: 106020. doi: 10.1016/j.ijmecsci.2020.106020
|
Figures(19) / Tables(2)
Copyright © Journal of Beijing University of Aeronautics and Astronautics
Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@cqjj8.com
Supported by:
Beijing Renhe Information Technology Co., Ltd.
DownLoad:
