| Citation: | BAI Jinyang, WU Xuelei, GAO Feng, et al. Modeling and simulation of multi-axle vehicle powertrain system[J]. Journal of Beijing University of Aeronautics and Astronautics, 2017, 43(1): 136-143. doi: 10.13700/j.bh.1001-5965.2016.0708(in Chinese) |
In order to study the dynamic load characteristics, the multi-axle vehicle powertrain system dynamics simulation model was developed. First, the engine dynamic characteristic model was built by obtaining the cycle fuel injection quantity-rotate speed-torque MAP according to the load characteristic test data and establishing a fuzzy PI controller to adjust the cycle fuel injection quantity. Second, the transmission system was built with modeling of the torque converter, the simplified clutch model, the transfer case, the interaxle differential, the main reducer, the wheel-side reducer, etc. Finally, the multi-axle vehicle powertrain system dynamics simulation model was established in Simulink. The comparison results between simulation and test data show that the model effectively simulates the dynamic load characteristics and the speed characteristics.
| [1] |
OSBORNE R P, WEAVER N.Optimum engine models for diesel automotive powertrain development processes[C]//IPDS 2006:Integrated Powertrain and Driveline Systems 2006.New Delhi:Woodhead Publishing Ltd.,2006:67-76.
|
| [2] |
周龙保. 内燃机学[M].北京:机械工业出版社,2005:37-41.
ZHOU L B.Internal combustion engine theory[M].Beijing:China Machine Press,2005:37-41(in Chinese).
|
| [3] |
DENNIS A, WALTER B,NABIL C.Integration and use of diesel engine, driveline and vehicle dynamics models for heavy duty truck simulation:1999-01-0970[R].Warrendale,PA:SAE International,1999.
|
| [4] |
BROOMHEAD T,MANZIE C,BREAR M, et al.Model reduction of diesel mean value engine models:2015-01-1248[R].Warrendale,PA:SAE International,2015.
|
| [5] |
WU Z H,PEI R.Torque based spark ignition engine and powertrain modeling[C]//Proceedings of the 7th World Congress on Intelligent Control and Automation,WCICA08.Piscataway,NJ:IEEE Press,2008:4767-4772.
|
| [6] |
YIN H B,LI H W,LV Q J.Integrated modeling and simulation on torsional loads of tracked vehicle's power train and propulsion system[J].Journal of System Simulation,2008,20(19):5171-5175.
|
| [7] |
周云波,常思勤,魏巍.基于MATLAB/SimDriveline的某型军用车辆起步过程仿真研究[J].南京理工大学学报,2011,35(4):507-512. http://www.cnki.com.cn/Article/CJFDTOTAL-NJLG201104016.htm
ZHOU Y B, CHANG S Q,WEI W.Military vehicle starting process simulation and analysis based on MATLAB/SimDriveline[J].Journal of Nanjing University of Science and Technology,2011,35(4):507-512(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-NJLG201104016.htm
|
| [8] |
BARAK A,KLIR V,CERVENKA L.Powertrain simulation tool:2011-37-0027[R].Detroit:SAE Technical Paper,2011.
|
| [9] |
杨得军,林柏忠,郭学立,等.汽车传动系实时动力学仿真模型[J].汽车工程,2006,28(5):430-432. http://www.cnki.com.cn/Article/CJFDTOTAL-QCGC200605004.htm
YANY D J, LIN B Z, GUO X L, et al.A real-time dynamics simulation model for vehicle powertrain[J].Automotive Engineering,2006,28(5):430-432(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-QCGC200605004.htm
|
| [10] |
戴振坤,刘艳芳,徐向阳,等.液力自动变速器传动系统建模与换挡特性仿真[J].北京亚洲成人在线一二三四五六区学报,2012,38(8):1027-1031.
DAI Z K, LIU Y F,XU X Y, et al.Drive line modeling and shift charateristic simulation of automatic transmission powertrain system[J].Journal of Beijing University of Aeronautics and Astronautics,2012,38(8):1027-1031(in Chinese).
|
| [11] |
逄淑一,管欣,杨得军.基于总成特性的动力传动系统建模研究[J].汽车工程,2013,35(10):873-877. http://www.cnki.com.cn/Article/CJFDTOTAL-QCGC201310004.htm
PANG S Y,GUAN X,YANG D J.A research on powertrain modeling based on subsystem characteristics[J].Automotive Engineering,2013,35(10):873-877(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-QCGC201310004.htm
|
| [12] |
SALAANI M K,GUENTHER D A,HEYDINGER G J.Vehicle dynamics modeling for the national advanced driving simulator of a 1997 jeep cherokee:1999-01-0121[R].Warrendale,PA:SAE International,1999.
|
| [13] |
SALAANI M K,GUENTHER D A.Powertrain and brake modeling of the 1994 ford taurus for the national advanced driving simulator:981190[R].Warrendale,PA:SAE International,1998.
|
| [14] |
管欣,卢萍萍,詹军,等.多轴全轮驱动车辆动力传动系模型的建立与应用[J].汽车工程,2011,33(3):183-187. http://www.cnki.com.cn/Article/CJFDTOTAL-QCGC201103002.htm
GUAN X,LU P P,ZHAN J,et al.Modeling and application of powertrain model for multi-axle all-wheel-drive vehicle[J].Automotive Engineering,2011,33(3):183-187(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-QCGC201103002.htm
|
| [15] |
袁银南,朱磊,陈笃红,等.基于准线性模型的柴油机电子调速仿真和实验研究[J].内燃机学报,2006,24(3):263-269. http://www.cnki.com.cn/Article/CJFDTOTAL-NRJX200603010.htm
YUAN Y N,ZHU L,CHEN D H,et al.Simulation and experiment study of electronic governor of diesel engine based on quasi-linear model[J].Transactions of CSICE,2006,24(3):263-269(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-NRJX200603010.htm
|
| [16] |
项昌乐.车辆传动系轴类零件疲劳设计与变矩器动态特性研究[D].北京:北京理工大学,2001:34.
XIANG C L.Fatigue design of shaft parts in vehicle transmission and research of the torque converter dynamic characteristics[D].Beijing:Beijing Institute of Technology,2001:34(in Chinese).
|
| [17] |
余志生.汽车理论[M].北京:机械工业出版社,2009:15.
YU Z S.Auto theory[M].Beijing:China Machine Press,2009:15(in Chinese).
|