| Citation: | GUO Tongbiao, BAI Junqiang, YANG Yixionget al. Influence of continuous trailing-edge variable camber wing on aerodynamic characteristics of airliner[J]. Journal of Beijing University of Aeronautics and Astronautics, 2017, 43(8): 1559-1566. doi: 10.13700/j.bh.1001-5965.2016.0583(in Chinese)
|
The continuous trailing-edge variable camber wing has a potential in improving the aerodynamic characteristics of the airliner, and is widely concerned recently. Based on the optimization design system constructed in this paper, the influence of continuous trailing-edge variable camber wing on the aerodynamic characteristics of the airliner wing-body configuration is presented. First, the free form deformation (FFD) technique is used to accomplish the parameterization of the continuous trailing-edge variable camber wing. Then, based on the RANS equation solver, the trailing-edge variable camber wing optimizations are carried out to reduce aerodynamic drag of the wing-body configuration around the design lift coefficients. Finally, the difference of the optimization design results by considering the trailing-edge deflection of the outboard wing and the whole wing is explored. The optimization results show that when the lift coefficient is lower than the design lift coefficient and only the deflection of outboard wing trailing-edge is considered, the favorable deflection direction to reduce the induced drag and wave drag is opposite, and it is difficult to reduce them simultaneously; when the deflection of inboard wing is also considered, the drag reduction quantity is much larger than that of the former optimization; when the lift coefficient exceeds the design lift coefficient, the trailing-edge deflection of both the outboard wing and the whole wing can reduce the wave drag and induced drag simultaneously, and their drag reduction quantity is almost the same.
| [1] |
RENEAUX J.Overview on drag reduction technologies for civil transport aircraft[C]//European Congress on Computational Methods in Applied Sciences and Engineering.Jyväskylä:University of Jyväskylä, 2004:7-24.
|
| [2] |
BRUNET M, LAFAGE R, AUBRY S, et al.The clean sky programme:Environmental benefits at aircraft level[C]//15th AIAA Aviation Technology, Integration, and Operations Conference.Reston:AIAA, 2015:6-22.
|
| [3] |
陈迎春.C919飞机空气动力设计[J].航空科学技术, 2012(5):10-13. http://www.cnki.com.cn/Article/CJFDTOTAL-HKKX201205006.htm
CHEN Y C.C919 aircraft aerodynamic design[J].Aeronautical Science & Technology, 2012(5):10-13(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-HKKX201205006.htm
|
| [4] |
URNES J, NGUYEN N, IPPOLITO C, et al.A mission adaptive variable camber flap control system to optimize high lift and cruise lift-to-drag ratios of future n+3 transport aircraft[C]//51th AIAA Aerospace Sciences Meeting.Reston:AIAA, 2013:1-7.
|
| [5] |
KOTA S.Shape control of adaptive structures using compliant mechanisms:AFRLSR-BL-TR-00-0125[R].Ann Arbor:Department of Mechanical Engineering and Applied Mechanics, 2000.
|
| [6] |
KERR-JIA L, KOTA S.Design of compliant mechanisms for morphing stricture shapes[J].Journal of Intelligent Material Systems and Structures, 2003, 14(6):279-391.
|
| [7] |
MARQUES M, GAMBOA P, ANDRADE E.Design of a variable camber flap for minimum drag and improved energy efficiency[C]//50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.Reston:AIAA, 2009:1-19.
|
| [8] |
DE GASPARI A, RICCI S, ANTUNES A, et al.Application of active camber morphing concept to a regional aircraft[C]//22nd AIAA/ASME/AHS Adaptive Structures Conference.Reston:AIAA, 2014:1-13.
|
| [9] |
YOKOZEKI T, SUGIURA A.Development and wind tunnel test of variable camber morphing wing:AIAA-2014-1261[R].Reston:AIAA, 2014.
|
| [10] |
KAUL U K, NGUYEN N T.Drag optimization study of variable camber continuous trailing edge flap using overflow:AIAA-2014-2444[R].Reston:AIAA, 2014.
|
| [11] |
LYU Z J, MARTINS J R R A.Aerodynamic shape optimization of an adaptive morphing trailing-edge wing[J].Journal of Aircraft, 2015, 52(6):1951-1970. doi: 10.2514/1.C033116
|
| [12] |
王婷, 王帮峰, 芦吉云, 等.一种拓扑优化方法在机翼可变后缘中的研究[J].机械科学与技术, 2011, 30(1):1660-1663. http://www.cnki.com.cn/Article/CJFDTOTAL-JXKX201110014.htm
WANG T, WANG B F, LU J Y, et al.The study of a topological optimization method on the adaptive wing's trailing edge[J].Mechanical Science and Technology for Aerospace Engineering, 2011, 30(1):1660-1663(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-JXKX201110014.htm
|
| [13] |
尹维龙, 石庆华, 田冬奎.变体后缘的索网传动机构设计与分析[J].航空学报, 2013, 34(8):1824-1831. http://www.cnki.com.cn/Article/CJFDTOTAL-HKXB201308009.htm
YIN W L, SHI Q H, TIAN D K.Design and analysis of transmission mechanism with cable networks for morphing trailing edge[J].Acta Aeronoutica et Astronautica Sinica, 2013, 34(8):1824-1831(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-HKXB201308009.htm
|
| [14] |
陈钱, 白鹏, 尹维龙, 等.可连续光滑偏转后缘的变弯度翼型气动特性分析[J].空气动力学报, 2010, 28(1):46-53. http://www.cnki.com.cn/Article/CJFDTOTAL-KQDX201001006.htm
CHEN Q, BAI P, YIN W L, et al.Analysis on the aerodynamic characteristics of variable camber airfoils with continuous smooth morphing trailing edge[J].Acta Aerodynamica Sinica, 2010, 28(1):46-53(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-KQDX201001006.htm
|
| [15] |
郭同彪, 白俊强, 杨体浩.后缘连续变弯对跨音速翼型气动特性影响研究[J].航空学报, 2016, 37(2):513-521.
GUO T B, BAI J Q, YANG T H.The influence investigation of continuous trailing-edge variable camber on the aerodynamic characteristics of transonic airfoils[J].Acta Aeronautica et Astronautica Sinica, 2016, 37(2):513-521(in Chinese).
|
| [16] |
梁煜, 单肖文.大型民机翼型变弯度气动特性分析与优化设计[J].航空学报, 2016, 37(3):790-798. http://www.cnki.com.cn/Article/CJFDTOTAL-HKXB201603005.htm
LIANG Y, SHAN X W.Aerodynamic analysis and optimization design for variable camber airfoil of civil transport jet[J].Acta Aeronautica et Astronautica Sinica, 2016, 37(3):790-798(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-HKXB201603005.htm
|
| [17] |
SEDERBERG T W, PARRY S R.Free-form deformation of solid geometric models[J].Computer Graphics, 1986, 20(4):151-160. doi: 10.1145/15886
|
| [18] |
JOHNSON F T, TINOCO E N, YU N J.Thirty years of development and application of CFD at Boeing commercial airplanes, seattle[J].Computers & Fluids, 2005, 34(10):1115-1151.
|
| [19] |
LEVY D W, LAFLIN K R, TINOCO E N, et al.Summary of data from the fifth computational fluid dynamics drag prediction workshop[J].Journal of Aircraft, 2014, 51(4):1194-1213. doi: 10.2514/1.C032389
|
| [20] |
BOER A D, SCHOOT V D, BIJL H.Mesh deformation based on radial basis function interpolation[J].Computers & Structures, 2007, 85(11-14):784-795.
|
Figures(12) / Tables(1)
Copyright © Journal of Beijing University of Aeronautics and Astronautics
Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@cqjj8.com
Supported by:
Beijing Renhe Information Technology Co., Ltd.
DownLoad:
