| Citation: | CUI Zhiwei, ZHENG Guolei. Corner building method and algorithm of automatic programing for aircraft structural parts[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(12): 2730-2737. doi: 10.13700/j.bh.1001-5965.2015.0810(in Chinese)
|
Aimed at the problems of inefficiency, heavy work and unstable quality in corner numerical control (NC) programing for aircraft structural parts, a new auto-extended method based on rounded corner face was put forward. Combined with process knowledge, the processing model of corner is set up, which is the key issue of automatic NC programming. First, some new terms were introduced, such as corner, rounded corner face, processing model of corner and interference region of corner machining. Next, in order to set up a model of corner processing, some methods were proposed which include auto-extended technology, side surface of revolution and cutting element computation methods, and interference region building approach. Based on the above research, an automatic NC programing system of corner was developed, which had been successfully applied in a large aviation manufacturing enterprise. The preliminary application shows that the method is valid for increasing efficiency and quality of corner NC programing, which leads to programing workload reduction.
| [1] |
CHEN S L, ZHENG G L, ZHOU M, et al.Process-scheme-driven automatic construction of NC machining cell for aircraft structural parts[J].Chinese Journal of Aeronautics, 2013, 26(5):1324-1335. doi: 10.1016/j.cja.2013.07.035
|
| [2] |
施建飞, 李迎光, 刘旭, 等.基于属性边点图的飞机结构件筋特征识别方法[J].计算机集成制造系统, 2014, 20(3):521-529. http://www.cnki.com.cn/Article/CJFDTOTAL-JSJJ201403009.htm
SHI J F, LI Y G, LIU X, et al.Rib feature recognition method for aircraft structural parts based on vertex attributed adjacency graph[J].Computer Integrated Manufacturing Systems, 2014, 20(3):521-529(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-JSJJ201403009.htm
|
| [3] |
高鑫, 李迎光, 张臣, 等.飞机结构件内型转角一体加工刀轨生成方法[J].航空学报, 2014, 35(9):2660-2671. http://www.cnki.com.cn/Article/CJFDTOTAL-HKXB201409030.htm
GAO X, LI Y G, ZHANG C, et al.An integrated machining tool path generation method for corner and profile of aircraft structural parts[J].Acta Aeronautica et Astronautica Sinica, 2014, 35(9):2660-2671(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-HKXB201409030.htm
|
| [4] |
TOLOUEI-RAD G M, PAYEGANEH G.A hybrid approach to automatic generation of NC programs[J].Journal of Achievements in Materials and Manufacturing Engineering, 2005, 14(1-2):83-89.
|
| [5] |
HAN J H, PRATT M, REGLI W C.Manufacturing feature recognition from solid models:A status report[J].IEEE Transactions on Robotics, 2000, 16(6):782-796. doi: 10.1109/70.897789
|
| [6] |
HENDERSON M R, ANDERSON D C.Computer recognition and extraction of form features:ACAD/CAM link[J].Computers in Industry, 1984, 5(4):329-339. doi: 10.1016/0166-3615(84)90056-3
|
| [7] |
JOSHI S, CHANG T C.Graph-based heuristics for recognition of machined features from a 3D solid model[J].Computer-Aided Design, 1988, 20(2):58-66. doi: 10.1016/0010-4485(88)90050-4
|
| [8] |
刘雪梅, 张树生, 崔卫卫, 等.逆向工程中基于属性邻接图的加工特征识别[J].计算机集成制造系统, 2008, 14(6):1162-1167. http://www.cnki.com.cn/Article/CJFDTOTAL-JSJJ200806018.htm
LIU X M, ZHANG S S, CUI W W, et al.Machined features recognition based on attributed adjacency graph in reverse engineering[J].Computer Integrated Manufacturing Systems, 2008, 14(6):1162-1167(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-JSJJ200806018.htm
|
| [9] |
VANDENBRANDE J H, REQUICHA A A G.Spatial reasoning for the automatic recognition of machinable features in solid models[J].IEEE Transactions on Transacitions on Pattern Analysis & Machine Intelligence, 1993, 15(12):1269-1285.
|
| [10] |
TSENG Y J, JOSHI S B.Recognition of interacting rotational and prismatic machining features from 3D mill-turn parts[J].International Journal of Production Research, 1998, 36(11):3147-3165. doi: 10.1080/002075498192346
|
| [11] |
WOO T C.Feature extraction by volume decomposition[C]//Proceedings CAD/CAM Technology in Mechanical Engineering.Cambridge:MIT, 1982:76-94.
|
| [12] |
SAKURAI H, DAVE P.Volume decomposition and feature recognition, Part Ⅱ:Curved objects[J].Computer-Aided Design, 1996, 28(6-7):519-537. doi: 10.1016/0010-4485(95)00067-4
|
| [13] |
SHEEN B T, YOU C F.Machining feature recognition and tool-path generation for 3-axis CNC milling[J].Computer-Aided Design, 2006, 38(6):553-562. doi: 10.1016/j.cad.2005.05.003
|
| [14] |
YU F F, DU B, REN W, et al.Slicing recognition of aircraft integral panel generalized pocket[J].Chinese Journal of Aeronautics, 2008, 21(6):585-592. doi: 10.1016/S1000-9361(08)60178-8
|
| [15] |
ZHOU G, LI Y, LIU C, et al.A feature-based automatic broken surfaces fitting method for complex aircraft skin parts[J].International Journal of Advanced Manufacturing Technology, 2015, 84(5-8):1001-1011.
|
| [16] |
WANG C C L, ELBER G.Multi-dimensional dynamic programming in ruled surface fitting[J].Computer-Aided Design, 2014, 51(6):39-49.
|
| [17] |
任朴林, 周来水, 安鲁陵, 等.基于散乱数据截面线的曲面重构算法研究[J].机械设计与制造工程, 2003, 32(3):82-85. http://www.cnki.com.cn/Article/CJFDTOTAL-JSYZ200606020.htm
REN P L, ZHOU L S, AN L L, et al.A surface reconstruction algorithm based on planar contours of discrete data[J].Machine Design and Manufacturing Engineering, 2003, 32(3):82-85(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-JSYZ200606020.htm
|
Figures(21) / Tables(2)
Copyright © Journal of Beijing University of Aeronautics and Astronautics
Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@cqjj8.com
Supported by:
Beijing Renhe Information Technology Co., Ltd.
DownLoad:
