Volume 44 Issue 8
Aug.  2018
Turn off MathJax
Article Contents
JIANG Dongsheng, BU Xueqin, LIN Guiping, et al. Control design and experimental verification of three-bed onboard oxygen generation system[J]. Journal of Beijing University of Aeronautics and Astronautics, 2018, 44(8): 1603-1608. doi: 10.13700/j.bh.1001-5965.2017.0748(in Chinese)
Citation: JIANG Dongsheng, BU Xueqin, LIN Guiping, et al. Control design and experimental verification of three-bed onboard oxygen generation system[J]. Journal of Beijing University of Aeronautics and Astronautics, 2018, 44(8): 1603-1608. doi: 10.13700/j.bh.1001-5965.2017.0748(in Chinese)

Control design and experimental verification of three-bed onboard oxygen generation system

doi: 10.13700/j.bh.1001-5965.2017.0748
More Information
  • Corresponding author: BU Xueqin, E-mail: buxueqin@cqjj8.com
  • Received Date: 04 Dec 2017
  • Accepted Date: 08 Jan 2018
  • Publish Date: 20 Aug 2018
  • Two-bed onboard oxygen generation system is facing the problem of large pressure fluctuation of output gas and high oxygen concentration at low altitude during the practical application process. In order to solve these problems, three-bed onboard oxygen generation system needs to be developed. According to the system control logic, the control mode that the electronic controlled pneumatic servo valve worked circularly was adopted. The control design of three-bed onboard oxygen generation system has been proposed. The control method of segmented regulation was proposed, in which different cycle time was applied depending on the altitude. Under different input pressure and flow conditions, the experiments of the three-bed onboard oxygen generation system were performed to investigate the influence of the cycle time on the oxygen concentration of product gas. The study results show that when the cycle time for low altitude and high altitude is determined to be 9 s and 6 s, respectively, and the segmented altitude is determined to be 3.5 km, the system control design is suitable for the three-bed onboard oxygen generation system, and meets the requirements for the control design of three-bed oxygen generation system.

     

  • loading
  • [1]
    REGE S U, YANG R T.Limits for air separation by adsorption with LiX zeolite[J].Industrial & Engineering Chemistry Research, 1997, 36(12):5358-5365.
    [2]
    戴先知, 刘应书.变压吸附过程数学模型及其应用[J].低温与特气, 2006, 24(1):36-42. doi: 10.3969/j.issn.1007-7804.2006.01.010

    DAI X Z, LIU Y S.Mathematical model and application of PSA process[J].Low Temperature and Special Gas, 2006, 24(1):36-42(in Chinese). doi: 10.3969/j.issn.1007-7804.2006.01.010
    [3]
    刘峰.航空个体防护技术与装备[M].北京:科学出版社, 2008.

    LIU F.Aviation personal protection technology and equipment[M].Beijing:Science Press, 2008(in Chinese).
    [4]
    肖华军.航空供氧装备应用生理学[M].北京:军事医学科学出版社, 2015.

    XIAO H J.Applied physiology of aviation oxygen supply equipment[M].Beijing:Military Medical Science Press, 2015(in Chinese).
    [5]
    顾飞龙. 碳分子筛变压吸附(PSA)法制取高纯度氮气的工艺研究[D]. 上海: 华东理工大学, 2010.

    GU F L. Study on manufacturing high-purity nitrogen by carbon molecular sieve pressure swing adsorption process[D]. Shanghai: East China University of Science and Technology, 2010(in Chinese).
    [6]
    王刚.碳分子筛制氮机新型高效吸附塔充填技术[J].煤矿安全, 2014, 45(7):56-58.

    WANG G.New and high efficient adsorption tower filling technique for carbon molecular sieve nitrogen machine[J].Laboratory of Coal Safety Technology, 2014, 45(7):56-58(in Chinese).
    [7]
    耿正波. 医用分子筛吸附制氧机的设计与开发[D]. 成都: 成都理工大学, 2010.

    GENG Z B. The design and development of medical molecularsieve adsorption oxygen plant[D]. Chengdu: Chengdu University of Technology, 2010(in Chinese).
    [8]
    龙春霞.制纯氧分子筛[J].广州化工, 2010, 38(11):67-69. doi: 10.3969/j.issn.1001-9677.2010.11.024

    LONG C X.Zeolite for producing high-purity oxygen[J].Guang-zhou Chemical Industry, 2010, 38(11):67-69(in Chinese). doi: 10.3969/j.issn.1001-9677.2010.11.024
    [9]
    TEAGUE K G, EDGAR T F.Predictive dynamic model of a small pressure swing adsorption air separation unit[J].Industrial & Engineering Chemistry Research, 1999, 38(10):3761-3775. doi: 10.1021/ie990181h
    [10]
    杨锋, 林贵平, 赵竞全.分子筛浓缩器非等温吸附模型[J].北京亚洲成人在线一二三四五六区学报, 2002, 28(1):8-11.

    YANG F, LIN G P, ZHAO J Q.Nonisothermal adsorption model for molecular sieve oxygen concentrator(MSOC)[J].Journal of Beijing University of Aeronautics and Astronautics, 2002, 28(1):8-11(in Chinese).
    [11]
    WU Y, LIN G P.Modeling and numerical simulation of onboard molecular sieve oxygen generation system[J].Transactions of Nanjing University of Aeronautics and Astronautics, 2004, 21(1):47-52.
    [12]
    王慧丹. 机载分子筛制氧系统的实验与仿真研究[D]. 北京: 北京亚洲成人在线一二三四五六区, 2011.

    WANG H D. Experimental and simulation study of onboard molecular sieve oxygen generation system[D]. Beijing: Beihang University, 2011(in Chinese).
    [13]
    肖华军.英国机载三层同心圆型分子筛制氧系统[J].国际航空, 1994(1):60-61.

    XIAO H J.British onboard three layers concentric circular molecular sieve oxygen generation system[J].National Defense Aviation, 1994(1):60-61(in Chinese).
    [14]
    LOVETT N P J, ASHDOWN R. Development of the OBOGS and BRAG valve for the F-22 life support system[R]. Phoenix: SAFE Association, 1998: 62-71.
    [15]
    SANTOS J C G F. Study of new adsorbents and operation cycles for medical PSA units[D]. Oporto City: Universidade do Porto, 2005.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(9)  / Tables(1)

    Article Metrics

    Article views(864) PDF downloads(624) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return