Volume 42 Issue 8
Aug.  2016
Turn off MathJax
Article Contents
ZHANG Xin, BAI Chaoping. Simulation test platform of electrostatic damage based on three-dimensional field-and-road coordinated method[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(8): 1739-1746. doi: 10.13700/j.bh.1001-5965.2015.0529(in Chinese)
Citation: ZHANG Xin, BAI Chaoping. Simulation test platform of electrostatic damage based on three-dimensional field-and-road coordinated method[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(8): 1739-1746. doi: 10.13700/j.bh.1001-5965.2015.0529(in Chinese)

Simulation test platform of electrostatic damage based on three-dimensional field-and-road coordinated method

doi: 10.13700/j.bh.1001-5965.2015.0529
  • Received Date: 17 Aug 2015
  • Publish Date: 20 Aug 2016
  • The electrostatic discharge has been taken as one of the main reasons for failures of electronic equipments, so electronic products are always tested to examine the antistatic ability in the process of development. However, the test is limited by high cost of expense, poor repeatability and damage on equipments. In this situation, the problems can be solved by building a simulation test platform of electrostatic damage based on three-dimensional field-and-road coordinated method. The platform is based on the computer simulation technology (CST) software and the results can be calculated through the electrostatic discharge gun module, tested equipment module, simulation parameter setting module and data output and processing module with the finite integration time domain solver. By using the platform, a data transmission equipment was tested with an 8 kV voltage touching input and then the conducted and radiated interference were analyzed with the results of surface currents and magnetic field distribution. Through building the simulation test platform of electrostatic damage, the purpose of repeatability and no damage of testing is achieved and the engineering guidance is meaningful.

     

  • loading
  • [1]
    徐明明.静电放电的危害与防护[J].科技传播,2011(13):36.XU M M.The damage and protection of ESD[J].Technology Spreading,2011(13):36(in Chinese).
    [2]
    吴健.静电放电(ESD)辐射特性的研究[D].哈尔滨:哈尔滨工业大学,2009:1.WU J.Research of fields radiated by electrostatic discharges[D].Harbin:Harbin Institute of Technology,2009:1(in Chinese).
    [3]
    刘尚合,刘卫东.电磁兼容与电磁防护相关研究进展[J].高电压技术,2014,40(6):1605-1613.LIU S H,LIU W D.Progress of relevant research on electromagnetic compatibility and electromagnetic protection[J].High Voltage Engineering,2014,40(6):1605-1613(in Chinese).
    [4]
    原青云,刘尚合,张希军,等.IEC 61000-4-2标准试验平台的局限性分析及其完善的探讨[J].高电压技术,2011,37(1):118-123.YUAN Q Y,LIU S H,ZHANG X J,et al.Analysis and devolopment of limitation of the ESD immunity test platform specified in the standard IEC 61000-4-2[J].High Voltage Engineering,2011,37(1):118-123(in Chinese).
    [5]
    CANIGGIA S,MARADEI F.Circuit and numerical modeling of electrostatic discharge generators[J].IEEE Transactions on Industry Applications,2006,42(6):1350-1357.
    [6]
    WANG K,POMMERENKE D,CHUNDRU R,et al.Numerical modeling of electrostatic discharge generators[J].IEEE Transactions on Electromagnetic Compatibility,2003,45(2):258-271.
    [7]
    CENTOLA F,POMMERENKE D,KAI W,et al.ESD excitation model for susceptibility study[C]//2003 IEEE International Symposium on Electromagnetic Compatibility.Piscataway,NJ:IEEE Press,2003,1:58-63.
    [8]
    SEKINE T,ASAI H,LEE J S.Unified circuit modeling technique for the simulation of electrostatic discharge ESD injected by an ESD generator[C]//2012 IEEE International Symposium on Electromagnetic Compatibility (EMC).Piscataway,NJ:IEEE Press,2012:340-345.
    [9]
    刘素玲.外场对通信线缆的瞬态响应分析及ESD放电电流的传输线理论分析[D].北京:北京邮电大学,2008:13.LIU S L.Transient analysis of telecommunication cable excited by external field and electrostatic discharge current analyzed by transmission line theory[D].Beijing:Beijing University of Posts and Telecommunications,2008:13(in Chinese).
    [10]
    王望.静电放电辐射电场的研究以及静电枪检验方法研究[D].北京:北京交通大学,2012:10.WANG W.The study of ESD radiation of the electric field and calibration method of ESD simulator[D].Beijing:Beijing Jiaotong University,2012:10(in Chinese).
    [11]
    KOO J,CAI Q,MUCHAIDZE G,et al.Frequency-domain measurement method for the analysis of ESD generators and coupling[J].IEEE Transactions on Electromagnetic Compatibility,2007,49(3):504-511.
    [12]
    LIU D,NANDY A,POMMERENKE D,et al.Full wave model for simulating a noiseken ESD generator[C]//2009 IEEE International Symposium on Electromagnetic Compatibility(EMC 2009).Piscataway,NJ:IEEE Press,2009:334-339.
    [13]
    CANIGGIA S,MARADEI F.Analytical and numerical simulation models for calculating EMI into circuits due to ESD radiated fields[C]//2011 IEEE International Symposium on Electromagnetic Compatibility(EMC 2011).Piscataway,NJ:IEEE Press,2011:602-606.
    [14]
    LIN J H,YOU J H.The full wave analysis of the influence by the affecting on the cell phone capacitive touch panel[J].International Journal of Science and Engineering,2014,4(1):55-58.
    [15]
    WILSON P F,MA M T.Fields radiated by electrostatic discharges[J].IEEE Transactions on Electromagnetic Compatibility,1991,33(1):10-18.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views(931) PDF downloads(682) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return