Advanced Search
Volume 41 Issue 3
Mar.  2015
Turn off MathJax
Article Contents
Journal of Beijing University of Aeronautics and Astronautics  > 2015  >  41(3): 449-455.
XU Fei, LI Chuanri, JIANG Tongminet al. Printed circuit board model updating based on response surface method[J]. Journal of Beijing University of Aeronautics and Astronautics, 2015, 41(3): 449-455. doi: 10.13700/j.bh.1001-5965.2014.0219(in Chinese)
Citation: XU Fei, LI Chuanri, JIANG Tongminet al. Printed circuit board model updating based on response surface method[J]. Journal of Beijing University of Aeronautics and Astronautics, 2015, 41(3): 449-455. doi: 10.13700/j.bh.1001-5965.2014.0219(in Chinese)
shu

Printed circuit board model updating based on response surface method

doi: 10.13700/j.bh.1001-5965.2014.0219

  • School of Reliability and Systems Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

  • Received Date: 22 Apr 2014
  • Publish Date: 20 Mar 2015
    Abstract
  • Optimization analysis based on response surface is used in finite element (FE) model updating in recent years. Printed circuit board (PCB) model updating process based on response surface was presented. First six modal frequencies of PCB were calculated using ANSYS and correlated with modal test results. Three objective functions were formed using the first three orders of FE analytical and measured modal frequencies. The fourth objective function was formed by the square of residuals between first six resonant frequencies. Each resonant frequency was given the same weight. A multi-objective genetic algorithm (MOGA) was used in optimized analysis to minimize the four objective functions. A case was presented to illustrate the proposed updating procedure. The results show that the model updating technique based on response surface can be used to improve the accuracy of PCB FE model, and can be analyzed directly by using commercial FE softwares now available, which is conducive to engineering application.

     

    • FullText(HTML)
  • loading
    • References(24)
  • [1]
    Baruch M. Optimization procedure to correct stiffness and flexibility matrices using vibration tests[J].AIAA Journal,1978,16(11): 1208-1210.
    [2]
    Baruch M, Bar Itzhack I Y.Optimal weighted orthogonalization of measured modes[J].AIAA Journal,1978,16(4):346-351.
    [3]
    Baruch M. Methods of reference basis for identification of linear dynamic structures[J].AIAA Journal,1984,22(4):561-564.
    [4]
    Berman A. Optimal weighted orthogonalization of measured modes-comment[J].AIAA Journal,1979,17(8): 927-928.
    [5]
    Berman A, Nagy E J.Improvement of a large analytical model using test data[J].AIAA Journal,1983,21(8):1168-1173.
    [6]
    Fox R, Kapoor M,Rate of change of eigenvalues and eigenvectors[J].AIAA Journal,1968,6(12)2426-2429.
    [7]
    Mottershead J E, Friswell M I.Model updating in structural dynamics:a survey[J].Journal of Sound and Vibration,1993,167(2) :347-375.
    [8]
    Friswell M I, Mottershead J E.Finite element model updating in structural dynamics[M].Dordrecht:Kluwer Academic Publishers,1995:158-256.
    [9]
    Natke H G, Lallement G,Cottin N.Properties of various residuals within updating of mathematical models[J].Inverse Problems in Engineering,1995,1(4)329-348.
    [10]
    Khodaparast H H, Mottershead J E,Friswell M I.Perturbation methods for the estimation of parameter variability in stochastic model updating[J].Mechanical Systems and Signal Processing,2008,22(8):1751-1773.
    [11]
    Shahverdi H, Mares C,Wang W,et al.Clustering of parameter sensitivities:examples from a helicopter airframe model updating exercise[J].Shock and Vibration,2009,16(1):75-88.
    [12]
    Mottershead J E, Link M,Friswell M I.The sensitivity method in finite element model updating:a tutorial[J].Mechanical Systems and Signal Processing,2011,25(7):2275-2296.
    [13]
    Ren W X, Fang S E,Deng M Y.Response surface-based finite-element-model updating using structural static responses[J].Journal of Engineering Mechanics,2010,137(4):248-257.
    [14]
    Ren W X, Chen H B.Finite element model updating in structural dynamics by using the response surface method[J].Engineering Structures,2010,32(8):2455-2465.
    [15]
    Zhou L R, Yan G R,Ou J P.Response surface method based on radial basis functions for modeling large-scale structures in model updating[J].Computer-Aided Civil and Infrastructure Engineering,2013,28(3):210-226.
    [16]
    Pitarresi, J M.Modeling of printed circuit cards subject to vibration[C]//IEEE Proceedings of the Circuits and Systems Conference.Piscataway,NJ:IEEE,1990,3:2104-2107.
    [17]
    Pitarresi J M, Celetka D,Coldwel R,et al.The smeared properties approach to FE vibration modeling of printed circuit cards[J].ASME Journal of Electronics Packaging,1991,113(3)250-257.
    [18]
    Pitarresi J M, Primavera A.Comparison of vibration modeling techniques for printed circuit cards[J].Journal of Electronic Packaging,1992,114(4)378-383.
    [19]
    Lim G, Ong J,Penny J.Effect of edge and internal point support of a printed circuit board under vibration[J].ASME Journal of Electronic Packaging,1999,121(2)122-126.
    [20]
    Deiter A, Baker M.Using analysis to design for drop or other shock environment[J].Sound & Vibration,2000,36(10):26-30.
    [21]
    Li R S. A methodology for fatigue prediction of electronic components under random vibration load[J]Transactions of the ASME,2001,123(4)394-400.
    [22]
    Amy R A, Aglietti G S,Richardson G.Sensitivity analysis of simplified printed circuit board finite element models[J].Microelectronics reliability,2009,49(7):791-799.
    [23]
    Amy R A, Aglietti G S,Richardson G.Accuracy of simplified printed circuit board finite element models[J].Microelectronics Reliability,2010,50(1):86-97.
    [24]
    刘孝保,杜平安, 夏汉良,等.一种面向动态分析的PCB板等效建模方法[J].仪器仪表学报,2011,32(4):863-869. Liu X B,Du P A,Xia H L,et al.Dynamic property analysis-oriented PCB equivalent modeling method[J].Chinese Journal of Scientific Instrument,2011,32(4):863-869(in Chinese).
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views(1089) PDF downloads(624) Cited by()
    Proportional views
    Related

    Copyright © Journal of Beijing University of Aeronautics and Astronautics

    Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@cqjj8.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return