Advanced Search
Volume 41 Issue 3
Mar.  2015
Turn off MathJax
Article Contents
Journal of Beijing University of Aeronautics and Astronautics  > 2015  >  41(3): 479-484.
XU Lang, HE Weiping, WAN Min, et al. Self-adaptive laser marking technology for marking code on tool[J]. Journal of Beijing University of Aeronautics and Astronautics, 2015, 41(3): 479-484. doi: 10.13700/j.bh.1001-5965.2014.0206(in Chinese)
Citation: XU Lang, HE Weiping, WAN Min, et al. Self-adaptive laser marking technology for marking code on tool[J]. Journal of Beijing University of Aeronautics and Astronautics, 2015, 41(3): 479-484. doi: 10.13700/j.bh.1001-5965.2014.0206(in Chinese)
shu

Self-adaptive laser marking technology for marking code on tool

doi: 10.13700/j.bh.1001-5965.2014.0206
  • 1.

    School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

  • 2. School of Mechatronics, Northwestern Polytechnical University, Xi'an 710072, China

  • Received Date: 15 Apr 2014
  • Publish Date: 20 Mar 2015
    Abstract
  • In view of the recent situation that several defects of traditional laser marking code on tool appear such as marking inefficiency, marking quality instability and the harm to workers, a self-adaptive laser marking technology was put forward. The conveyor and V-block of specific structure were designed with photoelectric switch detection function to realize self-adaptive tool delivery. Besides, a kind of gripper was developed that made the different tool axes stand in the same position after grasping, which ensured that all of the different tool ends could quickly locate to laser marking area. Moreover, using the rapid moving of gripper, a photoelectric switch was adopted auxiliary focus to improve the speed and precision of focusing. Under the support of the three key technologies above, the whole design of project was completed. The test results of prototype prove that the self-adaptive laser marking technology increases the marking efficiency of more than four times compared with that of the traditional way and ensures the marking quality reliably. This technology achieves the goal of unmanned marking.

     

    • FullText(HTML)
  • loading
    • References(17)
  • [1]
    Miyashita K, Okazaki T.Simulation-based advanced WIP management and control in semiconductor manufacturing[C]//Proceedings of the 2004 Winter Simulation Conference.Washington,D C:ACM Press,2004:1943-1950.
    [2]
    王苏安,何卫平, 张维,等.刀具直接标刻与识别技术研究[J].计算机集成制造系统,2007,13(6):1169-1174. Wang S A,He W P,Zhang W,et al.Direct tool marking & identification method[J].Computer Integrated Manufacturing Systems,2007,13(6):1169-1174(in Chinese).
    [3]
    吴小军. 基于激光字符标刻及识别技术的刀具全寿命管理系统研究[D].南京:南京亚洲成人在线一二三四五六区,2010. Wu X J.Research on tool life cycle management system based on laser character marking and identification technology[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2010(in Chinese).
    [4]
    曹荣华. 激光直接标记二维条码的质量检测与评价技术研究[D].济南:山东大学,2012. Cao R H.Research on quality assessment and evaluation technique of 2D-barcodes using laser direct part marking[D].Jinan:Shandong University,2012(in Chinese).
    [5]
    秦应雄,唐霞辉, 钟如涛,等.激光标刻的复杂区域填充算法[J].华中科技大学学报,2006,34(8):59-61. Qin Y X,Tang X H,Zhong R T,et al.Filling algorithm for laser-marked complex region[J].Journal of Huazhong University of Science and Technology,2006,34(8):59-61(in Chinese).
    [6]
    杨泽光. 激光标刻系统的硬件控制设计及实现[D].成都:电子科技大学,2010. Yang Z G.The design and implementation of laser marking system hardware control[D].Chengdu:University of Electronic Science and Technology,2010(in Chinese).
    [7]
    唐玉俊, 袁自钧,赵永礼,等.基于DSP的激光打标控制器设计[J].电子科技,2010,23(8):97-99. Tang Y J,Yuan Z J,Zhao Y L,et al.Design of laser marking controller based on DSP[J].Electronic Science and Technology,2010,23(8):97-99(in Chinese).
    [8]
    Yu Q W, Wang D Y,Fang Y,et al.Research on the trajectory control method for laser marking[J].Key Engineering Materials,2014,579:614-617.
    [9]
    Yasa E, Kruth J P.Investigation of laser and process parameters for selective laser erosion[J].Precision Engineering,2010,34(1): 101-112.
    [10]
    解志锋, 张维,雷蕾,等.零件表面激光直接标刻二维条码的工艺参数优化研究[J].中国机械工程,2011,22(5):592-596. Xie Z F,Zhang W,Lei L,et al.Optimization of laser marking process parameters on 2D barcode in part surface[J].China Mechanical Engineering,2011,22(5):592-596(in Chinese).
    [11]
    邱化冬,路长厚, 肖如镜.激光参量对铝合金直接标识条码的影响[J].中国激光,2011,38(8):95-99. Qiu H D,Lu C H,Xiao R J.Laser parameters influence in direct part marking barcodes on aluminum alloy[J].Chinese Journal of Lasers,2011,38(8):95-99(in Chinese).
    [12]
    郭永强,吴磊, 徐阳熠,等.基于VIS打标系统的二维码标刻工艺研究[J].应用激光,2013,33(3):285-289. Guo Y Q,Wu L,Xu Y Y,et al.Research on the process of marking two-dimensional codes by VIS marking machine[J].Applied Laser,2013,33(3):285-289(in Chinese).
    [13]
    Shidida D P, Mahdavian M,Brandt M.Study of effect of process parameters on titanium sheet metal bending using Nd:YAG laser[J].Optics & Laser Technology,2013,47:242-247.
    [14]
    陈敏,胡兵,郭飞, 等.激光飞动标刻软件研究[J].激光杂志,2003,24(3):64-65. Chen M,Hu B,Guo F,et al.Research of laser flying-marking software[J].Laser Journal,2003,24(3):64-65(in Chinese).
    [15]
    蔡兵,刘晓东, 童博,等.基于DSP和CPLD的激光飞动标刻研究[J].激光技术,2007,31(4):387-390. Cai B,Liu X D,Tong B,et al.Study on laser flying marking systems based on DSP and CPLD[J].Laser Technology,2007,31(4):387-390(in Chinese).
    [16]
    王俊杰. 传感器与检测技术[M].北京:清华大学出版社,2011:126. Wang J J.Sensors and detection technology[M].Beijing:Tsinghua University Press,2011:126(in Chinese).
    [17]
    李云江. 机器人概论[M].北京:机械工业出版社,2011:67-68. Li Y J.Introduction to robot[M].Beijing:China Machine Press,2011:67-68(in Chinese).
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views(1357) PDF downloads(581) Cited by()
    Proportional views
    Related

    Copyright © Journal of Beijing University of Aeronautics and Astronautics

    Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@cqjj8.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return